Soft Sealing Gate Valves

GATE VALVE SOFT SEALING

شیر کشویی زبانه لاستیکی

Soft Sealing Gate Valves

DN:50-600 mm | PN: 10-25 bar

Gate Valves are used in all water supply facilities, including raw drinking water and non-corrosive fluids up to 80 ° C. In open positions these valves cause little turbulence compared to other shut-off valves in the path, and also the pressure loss caused by them is not significant, and in the completely closed positions, They can prevent the flow well. The use of gate valves in transmission lines as a flow controller is not allowed and must be used in fully open or fully closed state.

DN: 50 - 50
mm
PN: 10 - 10
Bar

Gate Valves are used in all water supply facilities, including raw drinking water and non-corrosive fluids up to 80 ° C. In  open positions these valves cause little turbulence compared to other shut-off valves in the path, and also the pressure loss caused by them is not significant, and in the completely closed positions, They can prevent the flow well. The use of gate valves in transmission lines as a flow controller is not allowed and must be used in fully open or fully closed state

  • Flange : according to DIN EN 1092-2 (DIN 2501)
  • Valve design according to DIN 3352-Part4 standard
  • face to face : according to DIN EN 558-1 Series 14 (DIN 3202-F4)
  • The final test of valves : according to DIN EN 12266-1

Advantages:

  • Easy opening and closing with a full sealing on both sides.
  • Free service and maintenance during operation.

Corrosion Protection:

 Electrostatic Epoxy powder Coating with  Min thickness 250  , certified by reputable  international institutions potable water.

Spare Parts

Material

Part Name

 

Ductile Iron (GJS 400-15) *

Body

2.0540 (Cu Zn 35 Ni F 45)

Stem Nut

EN-GJS-400-15 fully covered with EPDM or NBR

Wedge

NBR or EPDM

Gasket

 

Ductile Iron (GJS 400-15) *

Bonnet

NBR or EPDM

Gasket

 

Galvanized steel

Bolts

 

Galvanized steel

Nuts

 

Ductile Iron (GJS 400-15) *

Stem bearing

NBR or EPDM

O- ring

 

Galvanized steel

Bolts

Stainless Steel 1.4021

Stem

 

Ductile Iron

Hand wheel

* EN-GJS-500-7 (GGG50)Can also be produced as requested.

Technical drawings of this valve will be Uploaded soon