Clamp coupling for pipes, fittings and types of couplings

CLAMP COUPLING

نشت بند لوله و اتصالات

Clamp coupling for pipes, fittings and types of couplings

DN:50-3000 mm | PN: 10-25 bar

These products are used to prevent leakage in leaking pipes, fittings and couplings, and any connection that has leaked in the flow lines, without the necessity to shut off the flow After sealing operations, there would be no need to change the fittings no longer . These clamps are produced in two types. The former is used for leaking pipes and the latter for leaky and buried fittings and their accessories.

DN: 50 - 50
mm
PN: 10 - 10
Bar

The coupling can be used to connect the pipe below or above ground level by observing the following technical specifications. By using the water coupling system, there will be no need for threading , bevelling, welding or flanging the  pipe end  and the problems caused by the contraction and longitudinal expansion in the pipes on this fitting  will be eliminated

Clamp coupling for pipes, fittings and types of couplings

These products are used to prevent leakage in leaking pipes, fittings and couplings, and any connection that has leaked in the flow lines, without the necessity to shut off the flow After sealing operations, there would be no need to change the fittings no longer . These clamps  are produced in two types. The former is used for leaking pipes and the latter for leaky and buried fittings and their accessories.

Item No

Name

Material

1

Body

ST37-2 or Ductile Iron (GJS 400-15)

2

End Ring

ST37-2 or Ductile Iron (GJS 400-15) 

3

Gasket

NBR or EPDM

4

Bolts & Nuts

Galvanized steel

 

به زودی نقشه های فنی این شیر قابل دانلود می باشد.