The function of this valve is protecting the pump and the electric motor and preventing water hammer when it is turned off. Using this valve makes it easy to start up the electric pump and reduces the electric current. This valve is closed when the pump is started until the engine reaches the nominal speed of the valve and then opens, and when the pump is turned off, it is closed 90% slowly, and then turned off completely. In the event of a sudden power failure, it acts as check valve. And prevents returning flow and destructive damages of the pump. In order to regulate the flow or pressure from a hydraulic circuit and with a pressure difference across the valve and by using a pilot, it can regulate the flow or pressure.
Product features and advantages:
- Easy installation due to the low weight of the valve
- Flange: in accordance with (2501 DIN) EN 1092-2
- Face to face: according to ( DIN 3202) DIN EN 558-1 Series1) F1
- Final test of the valve: in accordance with DIN EN 12266-1
Corrosion Protection : Electrostatic epoxy powder Coating with a min thickness 250 and certified by reputable international institutions, for potable water
Spare Parts | Material | Part Name | Part No. |
| Ductile iron) GJS 400-15)* | Body | 1 |
| Ductile iron) GJS 400-15)* | Cover | 2 |
| 1.4308 | Seat | 3 |
• | 1.4301 | Stem | 4 |
• | EPDM or NBR | Sealing Ring | 5 |
| Ductile iron) GJS 400-15) | Disc | 6 |
• | EPDM or NBR | Diaphragm | 7 |
| Ductile iron(GJS 400-15) or Al.Bz | Diaphragm Washer | 8 |
• | 1.4310 | 1.4301 | Spring | 9 |
| 1.4308 | Disc Guide | 10 |
• | A2 | Stem Nut | 11 |
• | 1.4310 | Bronze | Cover Bearing | 12 |
• | EPDM or NBR | Seat O-Ring | 13 |
| A2) 10inch and Larger) | Stud | 14 |
| A2 | Hex Nut (10” and Larger) | 15 |
• | A2 | Pipe Plug | 16 |
• | PTFE | Spacer Washer | 17 |
| A2 | Cover Bolt (6” and Smaller) | 18 |
They can also be produced with stainless steel or cast steel (WCB) as request
Technical drawings of this valve will be Uploaded soon