Clamp coupling for pipes, fittings and types of couplings
CLAMP COUPLING
Clamp coupling for pipes, fittings and types of couplings
DN:50-3000 mm | PN: 10-25 bar
These products are used to prevent leakage in leaking pipes, fittings and couplings, and any connection that has leaked in the flow lines, without the necessity to shut off the flow After sealing operations, there would be no need to change the fittings no longer . These clamps are produced in two types. The former is used for leaking pipes and the latter for leaky and buried fittings and their accessories.
The coupling can be used to connect the pipe below or above ground level by observing the following technical specifications. By using the water coupling system, there will be no need for threading , bevelling, welding or flanging the pipe end and the problems caused by the contraction and longitudinal expansion in the pipes on this fitting will be eliminated
Clamp coupling for pipes, fittings and types of couplings
These products are used to prevent leakage in leaking pipes, fittings and couplings, and any connection that has leaked in the flow lines, without the necessity to shut off the flow After sealing operations, there would be no need to change the fittings no longer . These clamps are produced in two types. The former is used for leaking pipes and the latter for leaky and buried fittings and their accessories.
Item No | Name | Material |
1 | Body | ST37-2 or Ductile Iron (GJS 400-15) |
2 | End Ring | ST37-2 or Ductile Iron (GJS 400-15) |
3 | Gasket | NBR or EPDM |
4 | Bolts & Nuts | Galvanized steel |
Technical drawings of this valve will be Uploaded soon